Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

M1A3P400-PQ208PP View Datasheet(PDF) - Microsemi Corporation

Part NameDescriptionManufacturer
M1A3P400-PQ208PP (A3Pxxx) ProASIC3 Flash Family FPGAs with Optional Soft ARM Support Microsemi
Microsemi Corporation Microsemi
M1A3P400-PQ208PP Datasheet PDF : 220 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
ProASIC3 DC and Switching Characteristics
Table 2-2 • Recommended Operating Conditions 1,2
Symbol
Parameters 1
Commercial
Industrial Units
TA
TJ
VCC3
Ambient temperature
Junction temperature
1.5 V DC core supply voltage
0 to +70
-40 to +85
°C
0 to 85
-40 to 100
°C
1.425 to 1.575 1.425 to 1.575 V
VJTAG
VPUMP
JTAG DC voltage
Programming voltage
Programming Mode 4
Operation 5
1.4 to 3.6
3.15 to 3.45
0 to 3.6
1.4 to 3.6
V
3.15 to 3.45
V
0 to 3.6
V
VCCPLL
Analog power supply (PLL)
1.425 to 1.575 1.425 to 1.575 V
VCCI and VMV 6 1.5 V DC supply voltage
1.425 to 1.575 1.425 to 1.575 V
1.8 V DC supply voltage
1.7 to 1.9
1.7 to 1.9
V
2.5 V DC supply voltage
2.3 to 2.7
2.3 to 2.7
V
3.3 V DC supply voltage
3.3 V wide range DC supply voltage 7
3.0 to 3.6
2.7 to 3.6
3.0 to 3.6
V
2.7 to 3.6
V
LVDS/B-LVDS/M-LVDS differential I/O
2.375 to 2.625 2.375 to 2.625 V
LVPECL differential I/O
3.0 to 3.6
3.0 to 3.6
V
Notes:
1. All parameters representing voltages are measured with respect to GND unless otherwise specified.
2. To ensure targeted reliability standards are met across ambient and junction operating temperatures, Microsemi
recommends that the user follow best design practices using Microsemi’s timing and power simulation tools.
3. The ranges given here are for power supplies only. The recommended input voltage ranges specific to each I/O
standard are given in Table 2-18 on page 2-18.
4. The programming temperature range supported is Tambient = 0°C to 85°C.
5. VPUMP can be left floating during operation (not programming mode).
6. VMV and VCCI should be at the same voltage within a given I/O bank. VMV pins must be connected to the
corresponding VCCI pins. See the "VMVx I/O Supply Voltage (quiet)" section on page 3-1 for further information.
7. 3.3 V wide range is compliant to the JESD8-B specification and supports 3.0 V VCCI operation.
Table 2-3 • Flash Programming Limits – Retention, Storage and Operating Temperature1
Product
Grade
Commercial
Programming Program Retention Maximum Storage
Maximum Operating
Cycles
(biased/unbiased) Temperature TSTG (°C) 2 Junction Temperature TJ (°C) 2
500
20 years
110
100
Industrial
500
20 years
110
100
Notes:
1. This is a stress rating only; functional operation at any condition other than those indicated is not implied.
2. These limits apply for program/data retention only. Refer to Table 2-1 on page 2-1 and Table 2-2 for device operating
conditions and absolute limits.
2-2
Revision 13
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2020  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]