M1A3P1000-1FGG144YES View Datasheet(PDF) - Microsemi Corporation

Part Name

Description

Manufacturer

M1A3P1000-1FGG144YES

(A3Pxxx) ProASIC3 Flash Family FPGAs with Optional Soft ARM Support

Microsemi Corporation 

ProASIC3 Device Family Overview

4. Sort the pins as desired by clicking any of the column headers to sort the entries by that header.

Select the I/Os you wish to modify (Figure 1-4 on page 1-8).

5. Set the I/O Output State. You can set Basic I/O settings if you want to use the default I/O settings

for your pins, or use Custom I/O settings to customize the settings for each pin. Basic I/O state

settings:

1 – I/O is set to drive out logic High

0 – I/O is set to drive out logic Low

Last Known State – I/O is set to the last value that was driven out prior to entering the

programming mode, and then held at that value during programming

Z -Tristate: I/O is tristated

Figure 1-4 • I/O States During Programming Window

6. Click OK to return to the FlashPoint – Programming File Generator window.

Note: I/O States During programming are saved to the ADB and resulting programming files after

completing programming file generation.

1-8

Revision 13

Share Link: