Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

M1A3P400-PQG208ES View Datasheet(PDF) - Microsemi Corporation

Part NameDescriptionManufacturer
M1A3P400-PQG208ES (A3Pxxx) ProASIC3 Flash Family FPGAs with Optional Soft ARM Support Microsemi
Microsemi Corporation Microsemi
M1A3P400-PQG208ES Datasheet PDF : 220 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
ProASIC3 Device Family Overview
The inputs of the six CCC blocks are accessible from the FPGA core or from one of several inputs
located near the CCC that have dedicated connections to the CCC block.
The CCC block has these key features:
• Wide input frequency range (fIN_CCC) = 1.5 MHz to 350 MHz
• Output frequency range (fOUT_CCC) = 0.75 MHz to 350 MHz
• Clock delay adjustment via programmable and fixed delays from –7.56 ns to +11.12 ns
• 2 programmable delay types for clock skew minimization
• Clock frequency synthesis (for PLL only)
Additional CCC specifications:
• Internal phase shift = 0°, 90°, 180°, and 270°. Output phase shift depends on the output divider
configuration (for PLL only).
• Output duty cycle = 50% ± 1.5% or better (for PLL only)
• Low output jitter: worst case < 2.5% × clock period peak-to-peak period jitter when single global
network used (for PLL only)
• Maximum acquisition time = 300 µs (for PLL only)
• Low power consumption of 5 mW
• Exceptional tolerance to input period jitter— allowable input jitter is up to 1.5 ns (for PLL only)
• Four precise phases; maximum misalignment between adjacent phases of 40 ps × (350 MHz /
fOUT_CCC) (for PLL only)
Global Clocking
ProASIC3 devices have extensive support for multiple clocking domains. In addition to the CCC and PLL
support described above, there is a comprehensive global clock distribution network.
Each VersaTile input and output port has access to nine VersaNets: six chip (main) and three quadrant
global networks. The VersaNets can be driven by the CCC or directly accessed from the core via
multiplexers (MUXes). The VersaNets can be used to distribute low-skew clock signals or for rapid
distribution of high fanout nets.
1-6
Revision 13
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2020  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]