Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Part Name  

74ALVC162835ADGG View Datasheet(PDF) - Philips Electronics

Part Name74ALVC162835ADGG Philips
Philips Electronics Philips
Description18-bit registered driver with 30Ω termination resistors (3-State)
74ALVC162835ADGG Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Philips Semiconductors
18-bit registered driver with 30termination resistors
(3-State)
Product specification
74ALVC162835A
AC WAVEFORMS FOR VCC = 3.0V TO 3.6V AND
VCC = 2.7V RANGE
VM = 1.5 V
VX = VOL + 0.3V
VY = VOH – 0.3V
VOL and VOH are the typical output voltage drop that occur with the
output load.
VI = 2.7V
AC WAVEFORMS FOR VCC = 2.3V TO 2.7V AND
VCC < 2.3V RANGE
VM = 0.5 VCC
VX = VOL + 0.15V
VY = VOH – 0.15V
VOL and VOH are the typical output voltage drop that occur with the
output load.
VI = VCC
VI
An
INPUT
VM
GND
VOH
tPHL
tPLH
Yn
VM
OUTPUT
VOL
NOTE: VM = 0.5VCC at VCC = 2.3 to 2.7 V
SH00132
Waveform 1. Input (An) to output (Yn) propagation delay
VI
LE INPUT
GND
VM
tW
tPHL
VM
tPLH
VOH
Yn OUTPUT
VM
VOL
NOTE: VM = 0.5VCC at VCC = 2.3 to 2.7V
SH00134
Waveform 2. Latch enable input (LE) pulse width,
the latch enable input to output (Yn) propagation delays.
ÉÉÉÉÉÉ VI
An
INPUT
VM
GND
ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ
th
th
tSU
tSU
VI
LE
INPUT
VM
GND
NOTE: The shaded areas indicate when the input is permitted to change
for predictable output performance.
VM = 0.5VCC at VCC = 2.3 to 2.7V
SH00133
Waveform 3. Data set-up and hold times
for the An input to the LE input
VI
CP INPUT
GND
1/fMAX
VM
tW
tPHL
VM
tPLH
VOH
Yn OUTPUT
VM
VOL
NOTE: VM = 0.5VCC at VCC = 2.3 to 2.7 V
SH00135
Waveform 4. The clock (CP) to Yn propagation delays,
the clock pulse width and the maximum clock frequency.
VI
CP INPUT
VM
GND
An
VI
INPUT
GND
ÉÉÉÉÉÉÉÉÉÉÉÉtsu ÉÉÉth ÉÉÉÉÉÉÉÉÉÉÉÉtsuÉÉÉthÉÉÉÉÉÉ
VOH
Yn OUTPUT
VM
VOL
NOTE: The shaded areas indicate when the input is permitted to change
for predictable output performance.
VM = 0.5VCC at VCC = 2.3 to 2.7 V
SH00136
Waveform 5. Data set-up and hold times
for the An input to the clock CP input
VI
nOE INPUT
VM
GND
VCC
OUTPUT
LOW-to-OFF
OFF-to-LOW
VOL
tPLZ
VX
tPZL
VM
VOH
OUTPUT
HIGH-to-OFF
OFF-to-HIGH
tPHZ
VY
tPZH
VM
GND
outputs
enabled
outputs
disabled
outputs
enabled
NOTE: VM = 0.5VCC at VCC = 2.3 to 2.7 V
SH00137
Waveform 6. 3-State enable and disable times
2000 Jun 20
8
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]