74AHC123ABQ-Q100 View Datasheet(PDF) -
| 74AHC123ABQ-Q100 Datasheet PDF : 0 Pages | |||
NXP Semiconductors
74AHC123A-Q100; 74AHCT123A-Q100
Dual retriggerable monostable multivibrator with reset
6. Functional description
Table 3. Function table[1]
Input
nRD
nA
nB
L
X
X
X
H
X
X
X
L
H
L
H
H
L
H
Output
nQ
nQ
L
H
L[2]
H[2]
L[2]
H[2]
[1] H = HIGH voltage level;
L = LOW voltage level;
X = don’t care;
= LOW-to-HIGH transition;
= HIGH-to-LOW transition;
= one HIGH level output pulse;
= one LOW level output pulse.
[2] If the monostable multivibrator was triggered before this condition was established, the pulse continues as programmed.
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min Max Unit
VCC
VI
IIK
IOK
IO
ICC
IGND
Tstg
Ptot
supply voltage
input voltage
input clamping current
output clamping current
output current
supply current
ground current
storage temperature
total power dissipation
SO16 package
VI < 0.5 V
VO < 0.5 V or VO > VCC + 0.5 V
VO = 0.5 V to (VCC + 0.5 V)
Tamb = 40 C to +125 C
0.5
0.5
[1] 20
[1] -
-
-
75
65
+7.0 V
+7.0 V
-
mA
20 mA
25 mA
75
mA
-
mA
+150 C
[2] -
500 mW
TSSOP16 package
[3] -
500 mW
DHVQFN16 package
[4] -
500 mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] Ptot derates linearly with 8 mW/K above 70 C.
[3] Ptot derates linearly with 5.5 mW/K above 60 C.
[4] Ptot derates linearly with 4.5 mW/K above 60 C.
74AHC_AHCT123A_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 23 May 2013
© NXP B.V. 2013. All rights reserved.
6 of 22
|
|
Share Link: 