1-102917-2 View Datasheet(PDF) - Tyco Electronics
Part Name
Description
Manufacturer
1-102917-2 Datasheet PDF : 98 Pages
| |||
5
AMPMODU Interconnection System
Short Point Crimp Snap-In Receptacle Contacts
Material and Finish
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling —
page 270-272
Technical Documents —
pages 276-278
Product Specification
108-1472
Application Specification
114-25038
.068
[1.73]
.460
[11.68]
.060
[1.52]
C
C
.012
[0.30]
Gap
Section C - C
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
Extraction/Lance Reset
Tool No. 843477-1
Wire Size
Range
AWG [mm2]
Ins.
Dia.
Range
32-28 0.03-0.08 .025-.060 [0.64-1.52]
26-22 0.13-0.3 .025-.060 [.0.64-1.52]
24-20 0.2-0.5 .025-.060 [.0.64-1.52]
Finish
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Contact Part No.
(Standard Pressure)
Strip Form Loose Piece
1-104481-1
1-104481-0
5-104481-2
1-104480-3
1-104480-2
1-104480-7
1-104479-0
104479-9
104479-8
1-104481-3
1-104481-2
5-104481-6
1-104480-6
1-104480-5
1-104480-4
1-104479-3
1-104479-2
1-104479-1
Quick-Change
Applicator for
AMP-O-LECTRIC
Machine*
567296-2
567297-2
567298-2
Applicator for
AMP-O-MATIC
Stripper/Crimper
Machine
466980-1
Hand
Tool
Nos.
91518-1
466981-1
91518-1
466982-1
91551-1
*For use with Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-722-1111) for part nos. of applicators for use with the Model “G”
machines (shown on page 288), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
222
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
|
|
Share Link: 