datasheetq language:

5-1393302-2 View Datasheet(PDF) - Tyco Electronics

Part Name5-1393302-2 MACOM
Tyco Electronics Macom
DescriptionPlug-in relays Mini ISO relays
5-1393302-2 Datasheet PDF : 6 Pages
1 2 3 4 5 6
Plug-in relays
Mini ISO relays
Power relay F4
Catalog 1308028
Issued 01-05
Contact data
Contact configuration
Circuit symbol
(see also Pin assignment)
Make contact/
Form A or Form A (2x87)
or
Double make contact/
Form U
Changeover contact/
Form C
Rated voltage
Rated current at 85 °C
Contact material
Max. switching voltage/power
Max. switching current1)
On2)
Off
Min. recommended load4)
Voltage drop at 10 A (initial)
NO contact
NC contact
Mechanical endurance (without load)
Electrical endurance
(example of resistive load)
Max switching rate at nominal load
12 V
24 V
40 A
20 A
AgNi0.15
120 A
60 A
120 A
20 A
Typ. 15 mV, 200 mV max.
> 2 x 105
operations
40 A, 14 V
> 1 x 105
operations
20 A, 28 V
12 V
24 V
2 x 25 A
2 x 15 A
AgNi0.15
See load limit curve
2 x 100 A
2 x 100 A
2 x 40 A
2 x 15 A
1 A at 5 V
12 V
24 V
30/40 A 15/20 A
AgNi0.15
24 V3)
20/30 A
AgSnO2
NC/NO
45/120A
40/60A
NC/NO
45/120A
15/20A
NC/NO
45/120A
20/30A
Typ. 2 x 15 mV, 200 mV max.
> 107 operations
> 2 x 105
> 1 x 105
operations
operations
2 x 25 A, 14 V 2 x 15 A, 28 V
6 operations per minute (0.1 Hz)
Typ. 15 mV, 200 mV max.
Typ. 20 mV, 250 mV max.
> 2 x 105
operations
40 A, 14 V
(NO contact)
> 1 x 105 > 1 x 105
operations operations
20 A, 28 V 30 A, 28 V
(NO contact) (NO contact)
> 5 x 105
operations
10 A, 28 V
(NC contact)
1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 13.5 V for 12 V or 27 V for 24 V load voltages.
2) For a load current duration of maximum 3 s for a make/break ratio of 1:10.
3) Special high performance 24 V version with contact gap > 0.8 mm, part number V23134-A0056-X432/-X433 (see ordering information).
4) See chapter Diagnostics in our Application Recommendations on page 18.
Load limit curve
Load limit curve 1 ^= arc extinguishes
during transit time (changeover contact)
Load limit curve 2 ^= safe shutdown,
no stationary arc (make contact)
Pin assignment
1 make contact/
1 form A
Power relay F4 only
1 double make contact/
1 form U
Power relay F4 only
1 make contact (2 x pin 87)/
1 form A (2 x pin 87)
1 changeover contact/
1 form C
Models with resistor or
diode in parallel to the
coil on request.
34
Models with resistor or
diode in parallel to the
coil on request.
*) Models with resistor or
diode in parallel to the
coil on request.
Please observe the disclaimer.
Models with resistor or
diode in parallel to the
coil on request.
Direct download click here

Features
– Limiting continuous currents 60/40 A at the NO / NC contacts
– Dimensional characteristics and the functional allocations of the plug-in terminals to ISO 7588
– Standardized dimensions
– 24 V versions with contact gap > 0.8 mm
– Plug-in or PCB terminals

Typical applications
– Ignition lock
– Lamp load (headlights)
– Cooling fan
– ABS
– Exhaust emission control
– Cross carline up to 60 A
– Fuel pump
– Engine cooling fan
– A/C blower
– A/C compressor clutch
– Also available for 42 V applications

 

Share Link : Macom

Language : 한국어   日本語   русский   简体中文   español
@ 2015 - 2017  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]