DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

MIC706(2014) View Datasheet(PDF) - Micrel

Part Name
Description
Manufacturer
MIC706
(Rev.:2014)
Micrel
Micrel Micrel
MIC706 Datasheet PDF : 10 Pages
1 2 3 4 5 6 7 8 9 10
Micrel, Inc.
MIC705/706/707/708
Pin Description (Continued)
Pin Number
MIC706
7
8
N/A
Pin Number
MIC708
7
N/A
8
Pin Name Pin Name
/RESET
/WDO
RESET
/RESET is asserted if either VCC goes below the reset threshold voltage or by low
signal on the manual reset input (/MR). /RESET remains asserted for one reset
timeout period (200ms) after VCC exceeds the reset threshold voltage or after the
manual reset pin transition from low to high. The watchdog timer will not assert
/RESET unless /WDO is connected to /MR.
Output for the watchdog timer. The watchdog timer resets itself with each transition
to the watchdog input. If the WDI pin is held high or low for longer than the
watchdog timeout period, /WDO is forced low. /WDO will also be forced low if VCC
is below the reset threshold voltage and will remain low until VCC returns to a valid
level.
RESET is the compliment of /RESET and is asserted if either VCC goes below the
reset threshold voltage or by a low signal on the manual reset input (/MR). RESET
is suitable for microprocessor systems that use active high reset.
September 15, 2014
3
Revision 2.1
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]