Memory ICs
(3) Canceling modes
1) Read commands
BR9010 / BR9010F / BR9010FV / BR9020 / BR9020F /
BR9040 / BR9040F
SK
32 Clock
CS
DI
Start bit Operating code Address
4 bits
4 bits
8 bits
16 bits
DO
DO
Data
D15
Cancel can be performed for the entire read mode space
WC H or L
Cancellation method: CS HIGH
2) Write commands
SK
32 clock
CS
DI
Start bit Operating code Address DO Data D15
4 bits 4 bits 8 bits
16 bits
tE / W
R/B
a
b
c
d
WC
Canceling methods
a: Canceled by setting CS HIGH. The WC pin is not involved.
b: If the WC pin goes HIGH for even a second, writing is forcibly interrupted. Cancellation occurs even if the CS pin
is HIGH. At this point, data has not been written to the memory, so the data in the designated address has not
yet been changed.
c: The operation is forcibly canceled by setting the WC pin to HIGH or turning off the power supply (although we do
not recommend using this method). The data in the designated address is not guaranteed and should be written
once again.
d: If CS is set to HIGH while the R / B signal is HIGH (following the tE / W timing), the IC is reset internally, and waits
for the next command to be input.
16