AD7366-5/AD7367-5
AD7367-5 SPECIFICATIONS
AVCC = DVCC = 4.75 V to 5.25 V; VDD = 5 V to 16.5 V; VSS = −16.5 V to −5 V; VDRIVE = 2.7 V to 5.25 V; fSAMPLE = 500 kSPS; fSCLK = 20 MHz;
VREF = 2.5 V internal/external; TA = −40°C to +85°C, unless otherwise noted.
Table 3.
Parameter
Min
DYNAMIC PERFORMANCE
Signal-to-Noise Ratio (SNR)1
74
Signal-to-Noise (+ Distortion) Ratio (SINAD)1 73
Total Harmonic Distortion (THD)1
Spurious-Free Dynamic Range (SFDR)1
Intermodulation Distortion (IMD)1
Second-Order Terms
Third-Order Terms
Channel-to-Channel Isolation1
SAMPLE AND HOLD
Aperture Delay2
Aperture Jitter2
Aperture Delay Matching2
Full Power Bandwidth
DC ACCURACY
Resolution
14
Integral Nonlinearity (INL)1
Differential Nonlinearity (DNL)1
Positive Full-Scale Error1
Positive Full-Scale Error Match1
Zero Code Error1
Zero Code Error Match1
Negative Full-Scale Error1
Negative Full-Scale Error Match1
ANALOG INPUT
Input Voltage Ranges
(Programmed via RANGE Pins)
DC Leakage Current
Input Capacitance
Input Impedance
Typ Max Unit
76
dB
75
dB
−84 −78 dB
−87 −79 dB
−91
dB
−89
dB
−90
dB
10
ns
40
ps
±100
ps
35
MHz
8
MHz
Bits
±2 ±3.5 LSB
±0.5 ±0.90 LSB
±4 ±25 LSB
±5 ±25 LSB
±3
LSB
±0.2
LSB
±1 ±10 LSB
±5 ±25 LSB
±3
LSB
±0.2
LSB
±4 ±25 LSB
±5 ±25 LSB
±3
LSB
±0.2
LSB
±10 V
±5
V
0 to 10 V
±0.01 ±1
μA
9
pF
13
pF
500
kΩ
2.5
MΩ
250
kΩ
1.2
MΩ
Test Conditions/Comments
fIN = 50 kHz sine wave
fa = 49 kHz, fb = 51 kHz
@ 3 dB, ±10 V range
@ 0.1 dB, ±10 V range
Guaranteed no missed codes to 14 bits
±5 V and ±10 V analog input range
0 V to 10 V analog input range
Matching from ADC A to ADC B
Channel-to-channel matching for ADC A and ADC B
±5 V and ±10 V analog input range
0 V to 10 V analog input range
Matching from ADC A to ADC B
Channel-to-channel matching for ADC A and ADC B
±5 V and ±10 V analog input range
0 V to 10 V analog input range
Matching from ADC A to ADC B
Channel-to-channel matching for ADC A and ADC B
See Table 7
When in track, ±10 V range
When in track, ±5 V or 0 V to +10 V range
For ±10 V @ 500 kSPS
For ±10 V @ 100 kSPS
For ±5 V/0 V to +10 V @ 500 kSPS
For ±5 V/0 V to +10 V @ 100 kSPS
Rev. B | Page 5 of 28