EN29LV160JT-70TI View Datasheet(PDF) - Eon Silicon Solution Inc.

Part Name

Description

Manufacturer

EN29LV160JT-70TI

16 Megabit (2048K x 8-bit / 1024K x 16-bit) Flash Memory Boot Sector Flash Memory, CMOS 3.0 Volt-only

Eon Silicon Solution Inc. 

ABSOLUTE MAXIMUM RATINGS

Parameter

Storage Temperature

Plastic Packages

Ambient Temperature

With Power Applied

Output Short Circuit Current1

EN29LV160J

Value

Unit

-65 to +125

°C

-65 to +125

°C

-55 to +125

°C

200

MA

A9, OE#, Reset# 2

-0.5 to +11.5

V

Voltage with

All other pins 3

-0.5 to Vcc+0.5

V

Respect to Ground

Vcc

-0.5 to 4.0

V

Notes:

1. No more than one output shorted at a time. Duration of the short circuit should not be greater than one second.

2. Minimum DC input voltage on A9, OE#, RESET# pins is –0.5V. During voltage transitions, A9, OE#, RESET# pins may

undershoot Vss to –1.0V for periods of up to 50ns and to –2.0V for periods of up to 20ns. See figure below. Maximum DC

input voltage on A9, OE#, and RESET# is 11.5V which may overshoot to 12.5V for periods up to 20ns.

3. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, inputs may undershoot Vss to –1.0V for periods

of up to 50ns and to –2.0 V for periods of up to 20ns. See figure below. Maximum DC voltage on output and I/O pins is Vcc +

0.5 V. During voltage transitions, outputs may overshoot to Vcc + 1.5 V for periods up to 20ns. See figure below.

4. Stresses above the values so mentioned above may cause permanent damage to the device. These values are for a stress

rating only and do not imply that the device should be operated at conditions up to or above these values. Exposure of the

device to the maximum rating values for extended periods of time may adversely affect the device reliability.

RECOMMENDED OPERATING RANGES1

Parameter

Value

Unit

Ambient Operating Temperature

Commercial Devices

0 to 70

°C

Industrial Devices

-40 to 85

Operating Supply Voltage

Vcc

Regulated Voltage

Range: 3.0-3.6V

V

Full Voltage Range: 2.7 to

3.6V

1.

Recommended Operating Ranges define those limits between which the functionality of the device is guaranteed.

Vcc

+1.5V

Maximum Negative Overshoot

Maximum Positive Overshoot

4800 Great America Parkway, Suite 202

42

Santa Clara, CA 95054

Rev 0.3 Release Date: 2002/01/30

Tel: 408-235-8680

Fax: 408-235-8685

Share Link: