C9312SK-06 View Datasheet(PDF) - Hamamatsu Photonics
Part Name
Description
Manufacturer
C9312SK-06
Hamamatsu Photonics
C9312SK-06 Datasheet PDF : 6 Pages
| |||
Flat panel sensor C9312SK-06
s Timing chart
To acquire images through an image grabber board, parameters that match the following timing chart should be described in the
software program or parameter file.
Tvc (1 FRAME)
Vsync+ (GRABBER)
Hsync+ (GRABBER)
1st ROW
2nd ROW
LAST ROW
He
Thc (1 LINE)
1st ROW
2nd ROW
* All pulses are counted at the 'High' region of the Hsync+
Vsync+ (GRABBER)
LAST ROW
Hsync+ (GRABBER)
Phe Phd
DUMMY LINES
1st ROW
2nd ROW
Pg Phe Phd Phe Phd
Pclk+ (GRABBER)
* All pulses are counted at the riging edge of the Pclk+.
* The effective video output is only included in the “Phe” region. The “Phe” region is composed with effective pixel clocks
and dummy pixel clocks.
* Pclk always flows out regardless of the status for Vsync or Hsync.
Parameter
Dummy
He
Effective
Dummy
Dummy
Phe
Effective
Dummy
Phd
Pg
1 × 1 (Port A)
60
1092
0
0
2472
24
1062
1069
1 × 1 (Port B)
0
1092
60
KACCC0281EB
s External trigger mode
To acquire images in external trigger mode, input an external trigger pulse as shown below. When the time Tvd has passed after
the rising edge of the external trigger pulse, synchronous signals and video signals are output.
When used in synchronization with a pulsed X-ray source, X-rays should be irradiated during the Txray period.
FRAME TIME (Tvc to Tmax)
RECOMMENDATION: 50 % OF FRAME TIME
ExtTrgLemo
ExtTrgGrb
(TTL)
Tvd
Tvc - Tvdpw
Txray
Vsync+
(LVDS)
Hsync+, Pclk+ and Data 1-12 are the same as internal trigger mode.
· Tmax is defined as the reciprocal of the minimum value of Sf (ext).
· Txray = FRAME TIME - Tvd - (Tvc - Tvdpw)
KACCC0341EB
Parameter
Symbol
Delay time (only external trigger mode) Tvd
Vsync Cycle time (internal trigger mode)
Tvc
Dummy pulse width
Tvdpw
Note: The numbers of siginificant figures is two. (except Tvc)
Value
190
124
400
(Typ.)
Unit
µs
ms
µs
3
|
|
Share Link: