DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

ADC0808S125 View Datasheet(PDF) - NXP Semiconductors.

Part Name
Description
Manufacturer
ADC0808S125
NXP
NXP Semiconductors. NXP
ADC0808S125 Datasheet PDF : 23 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
NXP Semiconductors
ADC0808S125/250
Single 8-bit ADC, up to 125 MHz or 250 MHz
D0 to D7
CCS (fclk)
data
n2
data
n1
td(CCS)
data
n
data
n+1
50 %
CCS (fclk / 2)
Fig 6. Complete conversion signal timing diagram using CCS
50 %
001aab893
7.5 Full-scale input selection
The ADC0808S has an internal reference circuit which can be overruled by an external
reference voltage. This can be done with the full-scale reference voltage (Vref(fs))
according to Table 9.
The ADC provides the required common-mode voltage on pin CMADC. In case of internal
regulation, the regulator output voltage on pin CMADC is 0.95 V.
Table 9. Full-scale input selection
Full-scale reference voltage
Vref(fs)
1.15 V
Common-mode output
voltage VO(cm)
0.8 V
1.20 V
0.86 V
1.25 V
0.94 V
1.30 V
1.01 V
1.35 V
1.09 V
Maximum peak-to-peak input
voltage Vi(p-p)(max)
1.825 V
1.91 V
1.99 V
2.08 V
2.16 V
The internal reference circuit is enabled by connecting pin FSIN to ground. The
common-mode output voltage VO(cm) on pin CMADC will then be 0.95 V, and the
maximum peak-to-peak input voltage Vi(p-p)(max) will be 2.0 V; see Figure 7 and Figure 8.
The ADC full-scale input selection principle is shown in Figure 9.
ADC0808S125_ADC0808S250_3
Product data sheet
Rev. 03 — 24 February 2009
© NXP B.V. 2009. All rights reserved.
8 of 23
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]