Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

PS2561AL-1-F3 View Datasheet(PDF) - California Eastern Laboratories.

Part NameDescriptionManufacturer
PS2561AL-1-F3 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES CEL
California Eastern Laboratories. CEL
PS2561AL-1-F3 Datasheet PDF : 15 Pages
First Prev 11 12 13 14 15
PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
Peak reflow temperature
Time of peak reflow temperature
Time of temperature higher than 220 C
Time to preheat temperature from 120 to 180 C
Number of reflows
Flux
260 C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(2) Wave soldering
Temperature
Time
Preheating conditions
Number of times
Flux
260 C or below (molten solder temperature)
10 seconds or less
120 C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
Peak temperature (lead part temperature)
Time (each pins)
Flux
350 C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 C.
Data Sheet PN10222EJ08V0DS
11
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]