HIGH VOLTAGE MLC - COMMERCIAL
L
T
W
MB
COMMERCIAL RANGES
NOVACAP high voltage products are designed, manufactured and tested 100%
for optimum performance. These capacitors offer the highest capacitance available per kilo-
volt rating, in COG and X7R characteristics and are appropriate for commercial/industrial
applications to 10 KV. The non- polar inner electrode design permits capacitors to be
arrayed in stacks with no voltage gradient between units. Chips have rounded surfaces to
improve structural integrity and encapsulation in use. Applications include power sup-
ply and voltage multiplier circuits. Other sizes and voltage ratings are available,
please consult the factory. High reliability versions are offered and have restrict-
ed capacitance ranges, please refer to other NOVACAP data sheets.
COMMERCIAL RANGES, RATED TO 6 KV
SIZE
1515
1808
1812
1825
2020
2225
2520
3333
Min Cap
LENGTH L
WIDTH W
T MAX
MB
500V
600V
800V
1000V
2000V
3000V
4000V
5000V
6000V
100
.150 (3.81)
.150 (3.81)
.130 (3.30)
.040 (1.02)
100
.180 (4.57)
.080 (2.03)
.080 (2.03)
.038 (.965)
150
.180 (4.57)
.125 (3.18)
.100 (2.54)
.038 (.965)
390
.180 (4.57)
.250 (6.35)
.140 (3.56)
.038 (.965)
390
.200 (5.08)
.200 (5.08)
.180 (4.57)
.045 (1.14)
390
.220 (5.59)
.250 (6.35)
.150 (3.81)
.045 (1.14)
390
.250 (6.35)
.200 (5.08)
.180 (4.57)
.050 (1.27)
390
.330 (8.38)
.330 (8.38)
.250 (6.35)
.050 (1.27)
MAXIMUM CAPACITANCE
3 Digit Code: See How to Order
COG X7R COG X7R COG X7R COG X7R COG X7R COG X7R COG X7R COG X7R
682 184 332 823 562 154 183 474 183 474 223 564 273 684 563 105
392 104 272 683 472 124 123 274 103 224 153 394 123 334 333 564
392 823 222 393 472 823 123 224 682 154 123 274 103 224 183 474
392 563 182 223 392 473 103 184 682 124 123 224 103 184 183 394
222 822 102 392 222 822 682 273 472 223 103 333 682 333 123 683
102 332 471 122 102 272 332 103 272 822 472 123 392 123 103 333
331 152 121 561 271 122 102 472 821 392 681 682 152 562 392 153
•• •
•
• • 471 102 391 102 681 152 561 222 222 822
•• •
•
••
••
••
••
•
• 102 562
Dimensions are in inches, bracketed dimensions in millimeters. Tolerances are +/- 5% L & W, or .015” (0.38 mm), whichever is greater.
MB dimensions are maximum. T Max. for chip sizes 1808, 1812, 1825 and 2225 are greater than standard EIA max. thickness for those sizes.
26