FS6070-01 View Datasheet(PDF) - AMI Semiconductor
Part Name
Description
Manufacturer
FS6070-01 Datasheet PDF : 7 Pages
| |||
AMERICAN MICROSYSTEMS, INC.
October 2000
FS6070-01
1:4 HSTL to LVTTL Fanout Buffer IC
Preliminary Information
Table 5: DC Electrical Specifications
Unless otherwise stated, all power supplies = 3.465V, no load on any output, and ambient temperature range TA = 0°C to 70°C. Parameters denoted with an asterisk ( * ) represent nominal charac-
terization data and are not currently production tested to any specific limits. MIN and MAX characterization data are ± 3σ f rom typical. Negative currents indicate current flows out of the device.
PARAMETER
SYMBOL
CONDITIONS/DESCRIPTION
MIN.
TYP.
MAX. UNITS
Overall
Supply Current, Dynamic,
with Loaded Outputs
IDD
fHREF = 200.0MHz, fOUT = 66.67MHz
(divide-by-3) all supplies = 3.465V
fHREF = 200.0MHz, fOUT = 50.00MHz
(divide-by-4); all supplies = 3.465V
45
mA
35
Supply Current, Static
IDDs
HSTL Reference Input (HREF_P, HREF_N)
HREF stopped either high or low
1
mA
High-Level Input Voltage
Low-Level Input Voltage
Differential Cross Point Voltage
Input Leakage Current
VIH
VX + 0.1
VIL
See Table 4 for proper HSTL signal input
levels
VSS-0.3
VX
IIL
-5
VDD+0.3
V
VX - 0.1
V
2.2
V
5
µA
LVTTL Digital Inputs (OE_0, OE_1, DIVSEL)
High-Level Input Voltage
VIH
Low-Level Input Voltage
VIL
Input Leakage Current
IIL
2.0
VSS-0.3
-5
VDD+0.3
V
0.8
V
5
µA
LVTTL Clock Outputs (Q0_1:2, Q1_3:4)
High Level Output Source Current
Low Level Output Sink Current
Output Impedance
Tristate Output Current
Short Circuit Output Source Current
Short Circuit Output Sink Current
IOH min
IOH max
IOL min
IOL max
zOL
zOH
IOZ
IOSH
IOSL
VDD = 3.135V, VO = 1.0V
VDD = 3.465V, VO = 3.135V
VDD = 3.135V, VO = 1.95V
VDD = 3.465V, VO = 0.4V
Measured at 1.65V, output driving low
Measured at 1.65V, output driving high
VO = 0V; shorted for 30s, max.
VO = 3.3V; shorted for 30s, max.
-33
-74
mA
-22
-33
30
90
mA
34
38
12
18
55
Ω
12
22
55
-10
10
µA
-85
mA
98
mA
ISO9001
QS9000
3
|
|
Share Link: 