Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

AD8042-2004 View Datasheet(PDF) - Analog Devices

Part NameDescriptionManufacturer
AD8042(2004) Dual 160 MHz Rail-to-Rail Amplifier ADI
Analog Devices ADI
AD8042 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
AD8042
ABSOLUTE MAXIMUM RATINGS1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.6 V
Internal Power Dissipation2
Plastic DIP Package (N) . . . . . . . . . . . . . . . . . . . . . . 1.3 W
Small Outline Package (R) . . . . . . . . . . . . . . . . . . . . . 0.9 W
Input Voltage (Common Mode) . . . . . . . . . . . . . ± VS ± 0.5 V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . ± 3.4 V
Output Short-Circuit Duration
Observe Power Derating Curves
Storage Temperature Range (N, R) . . . . . . . –65C to +125C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . . 300C
NOTES
1 Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2 Specification is for the device in free air:
8-Lead Plastic DIP Package: qJA = 90C/W
8-Lead SOIC Package: qJA = 155C/W
MAXIMUM POWER DISSIPATION
The maximum power that can be safely dissipated by the AD8042
is limited by the associated rise in junction temperature. The
maximum safe junction temperature for plastic encapsulated
devices is determined by the glass transition temperature of the
plastic—approximately 150C. Exceeding this limit temporarily
may cause a shift in parametric performance due to a change in
the stresses exerted on the die by the package.
Exceeding a junction temperature of 175C for an extended
period can result in device failure.
While the AD8042 is internally short-circuit protected, this may
not be sufficient to guarantee that the maximum junction
temperature (150C) is not exceeded under all conditions. To
ensure proper operation, it is necessary to observe the maximum
power derating curves.
2.0
8-LEAD PLASTIC-DIP PACKAGE
TJ = 150؇C
1.5
1.0
8-LEAD SOIC PACKAGE
0.5
0
–50 –40 –30 –20 –10 0 10 20 30 40 50 60 70 80 90
AMBIENT TEMPERATURE (؇C)
Figure 3. Maximum Power Dissipation vs. Temperature
Model
AD8042AN
AD8042AR
AD8042AR-REEL
AD8042AR-REEL7
AD8042ARZ*
AD8042ARZ-REEL*
AD8042ARZ-REEL7*
AD8042ACHIPS
*Z = Pb-free part
ORDERING GUIDE
Temperature
Range
–40C to +85C
–40C to +85C
–40C to +85C
–40C to +85C
–40C to +85C
–40C to +85C
–40C to +85C
Package
Description
8-Lead DIP
8-Lead SOIC
8-Lead SOIC 13" REEL
8-Lead SOIC 7" REEL
8-Lead SOIC
8-Lead SOIC 13" REEL
8-Lead SOIC 7" REEL
DIE
Package
Option
N-8
SO-8
SO-8
SO-8
SO-8
SO-8
SO-8
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4,000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
AD8042 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
REV. C
–5–
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]