Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

3-1419104-8 View Datasheet(PDF) - TE Connectivity

Part Name
Description
Manufacturer
3-1419104-8
Te
TE Connectivity Te
3-1419104-8 Datasheet PDF : 4 Pages
1 2 3 4
General Purpose Relays
Power Relays
Potter & Brumfield
T9A Series, DC Coil 30A PCB or Panel Mount Relay (Continued)
Coil Data (continued)
Ambient temperature vs. coil voltage – 1W coil
Data below are average values and should be verified in application. Tests
were conducted within a 2’ (.6 m) cube (still air); at nominal coil power @
25°C; with normally open contact loaded; and with 4’ (1.22 m) long, #10
AWG load wires. P.C. board relays were mounted to a 30A, single side P.C.
board. Coil rise test conducted with a 30A PC board to maintain 20°C max.
rize at 30°C. The relay connections and wiring must be designed with an
adequate cross section to ensure proper current flow and heat dissipation.
140
120
100
80
60
40
Wash-Tight Relay, Vented (2,
20 Load Connections Via Q.C. Terminals,
PC Mount
0
60
80
100
120
140
160
Applied Coil Voltage (% of Rated Voltage)
140
120
100
80
60 Dust Protected Relay,
Flange Mount
40
60
80
100
120
140
160
Applied Coil Voltage (% of Rated Voltage)
0A
10A
20A
30A
180
0A
10A
20A
30A
180
140
120
100
80
60
40
20 Wash-Tight Relay, Vented (2
PC Terminals For Coil & Contacts
0
60
80
100
120
140
160
Applied Coil Voltage (% of Rated Voltage)
0A
10A
20A
30A
180
2) Remove knock-off nib after cleaning process for optimum life of wash-tight relays.
Dimensions
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
1500Vrms
2500Vrms
Initial surge withstand voltage
between contact and coil
6kV
Initial insulation resistance
between insulated elements
1x109
Clearance/creepage
between contact and coil 3.18mm clearance/6.3638mm
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil
-55ºC to 85ºC 3)
105°C models available
Category of environmental protection
IEC 61810 RT0 - open, RTI - dust protected,
RTII - flux proof, RTIII - wash tight
Vibration resistance (functional)
1.65mm max excursions, 10-55 Hz
Shock resistance (functional)
10g for 11msec
Shock resistance (destructive)
100g
Terminal type pcb-tht and pcb-tht + quick connect
Weight
26g mounting code 1
33g mounting codes 2 and 5
Resistance to soldering heat THT
IEC 60068-2-20
250°C
Packaging/unit
tray/50 pcs., bundle/250 pcs., box/500 pcs.
3) Operating ambient temperature must consider “Must Operate Voltage Change Over
Temperature,” Contact Temperature Rise, Coil Temperature Rise (If coil is not allowed to
cool) and Maximum Coil Temperature. Specification ambient considers 20A load with
coil cooled to ambient.
T9AS – Mounting and termination code 2
.250 x .032 QUICK
(6.35 x .81) CONNECT
.130 .020
(3.30 .51)
1.280 MAX.
(32.51)
Ø .03
(.80)
2 PLACES
.045 x .045
(1.14 x 1.14)
.032 x .062
(.81 x 1.57)
T9AP – Mounting and termination code 5
.187 x .020
(4.75 x .508)
QUICK
CONNECT
.250 x .032
(6.35 x .81)
QUICK
CONNECT
1.080 MAX.
(27.43)
1.980 MAX.
(50.29)
1.713 ± .010
(43.51 ± .25)
1.280 MAX.
(32.51)
1.100 MAX.
(27.94)
1.080 MAX.
(27.43)
1.100 MAX.
(27.94)
2
09-2015, Rev. 0815
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
.071 (1.80) RAD. FOR #6 SCREW
Note: Recommended mounting screw torque is 4.0-5.0 lbs.in when #6 screw is used.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Direct download click here

 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]