1N5807 View Datasheet(PDF) - Microsemi Corporation
Part Name
Description
Manufacturer
1N5807 Datasheet PDF : 7 Pages
| |||
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803
Website: http://www.microsemi.com
TECHNICAL DATA SHEET
Gort Road Bussiness Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
PACKAGE DIMENSIONS
Dimensions
Ltr
1N5802URS,
1N5804URS, 1N5806URS
Notes
Inches
Millimeters
Min Max Min Max 8
BD .091 .103 2.31 2.62
BL .168 .200 4.27 5.08
ECT .019 .028 0.48 0.71 8
S .003
0.08
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. Dimensions are pre-solder dip.
4. Minimum clearance of glass body to mounting surface on all orientations.
5. 5. Cathode marking to be either in color band, three dots spaced equally, or a color dot on the face of the end
tab.
6. Color dots will be .020 inch (0.51 mm) diameter minimum and those on the face of the end tab shall not lie
within .020 inch (0.51 mm) of the mounting surface.
7. In accordance with ASME Y14.5M, diameters are equivalent to x symbology.
8. One endcap shall be square and the other endcap shall be round.
FIGURE 2B. Physical dimensions of URS surface mount family.
T4-LDS-0168 Rev. 2 (111089)
Page 7 of 7
|
|
Share Link: 