DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

MTV018N20 View Datasheet(PDF) - Myson Century Inc

Part Name
Description
Manufacturer
MTV018N20
Myson
Myson Century Inc Myson
MTV018N20 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MYSON
TECHNOLOGY
1.0 PIN CONNECTION
VSSA 1
VCO 2
RP 3
VDDA 4
HFLB 5
SSB 6
SDA 7
SCK 8
16 VSS
VSSA 1
15 ROUT
VCO 2
14 GOUT
RP 3
13 BOUT
VDDA 4
12 FBKG
HFLB 5
11 HTONE/PWMCK SSB 6
10 VFLB
SDA 7
9 VDD
SCK 8
PWM0 9
PWM1 10
20 VSS
VSSA 1
19 ROUT
VCO 2
18 GOUT
RP 3
17 BOUT
VDDA 4
16 FBKG
HFLB 5
15 HTONE/PWMCK SSB 6
14 VFLB
SDA 7
13 VDD
SCK 8
12 PWM7
PWM0 9
11 PWM6
PWM1 10
PWM2 11
PWM3 12
MTV018
24 VSS
23 ROUT
22 GOUT
21 BOUT
20 FBKG
19 HTONE/PWMCK
18 VFLB
17 VDD
16 PWM7
15 PWM6
14 PWM5
13 PWM4
2.0 PIN DESCRIPTIONS
Name
VSSA
VCO
RP
VDDA
HFLB
SSB
SDA
SCK
PWM0
PWM1
Pin No.
I/O
N N20 N24
Descriptions
- 1 1 1 Analog ground. This ground pin is used to internal analog circuitry.
I/O 2 2 2 Voltage Control Oscillator. This pin is used to control the internal
oscillator frequency by DC voltage input from external low pass filter.
I/O 3 3 3 Bias Resistor. The bias resistor is used to regulate the appropriate
bias current for internal oscillator to resonate at specific dot fre-
quency.
- 4 4 4 Analog power supply. Positive 5 V DC supply for internal analog cir-
cuitry. And a 0.1uF decoupling capacitor should be connected across
to VDDA and VSSA.
I 5 5 5 Horizontal input. This pin is used to input the horizontal synchroniz-
ing signal. It is a leading edge triggered and has an internal pull-up
resistor.
I 6 6 6 Serial interface enable. It is used to enable the serial data and is
also used to select the operation of I2C or SPI bus. If this pin is left
floating, I2C bus is enabled, otherwise the SPI bus is enabled.
I 7 7 7 Serial data input. The external data transfer through this pin to inter-
nal display registers and control registers. It has an internal pull-up
resistor.
I 8 8 8 Serial clock input. The clock-input pin is used to synchronize the
data transfer. It has an internal pull-up resistor.
O - 9 9 Open-Drain PWM D/A converter 0. The output pulse width is pro-
grammable by the register of Row 15, Column 19.
O-
10 10 Open-Drain PWM D/A converter 1. The output pulse width is pro-
grammable by the register of Row 15, Column 20.
2/16
MTV018 Revision 4.0 10/21/1999
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]