Electrical Characteristics (Cont’d): (TA = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Static Characteristics (Cont’d)
Forward Current Transfer Ratio
hFE VCE = 5V, IC = 2mA
400 – 800
VCE = 5V, IC = 100µA, Note 2
– 300 –
Breakdown Voltage
Collector–to–Emitter
V(BR)CEO IC = 10mA, Note 3
50 – – V
Breakdown Voltage
Collector–to–Base
V(BR)CBO IC = 10µA
70 – – V
Breakdown Voltage
Emitter–to–Base
V(BR)EBO IE = 10µA
5– –V
Collector Saturation Voltage
Base Saturation Voltage
Base Emitter ON Voltage
Dynamic Characteristics
VCE(sat)
VBE(sat)
VBE(on)
IC = 10mA, IB = 1mA, Note 3
IC = 10mA, IB = 1mA, Note 3
VCE = 10V, IC = 2mA
– – 0.125 V
– – 0.78 V
0.5 – 0.9 V
Forward Current Transfer Ratio
Output Capacitance,
Common Base
hfe VCE = 5V, IC = 2mA, f = 1kHz 400 – 1200
Ccb VCB = 10V, IE = 0, f = 1kHz
– – 4 pF
Noise Figure
NF IC = 100µA, VCE = 5V,
Rg = 5kΩ, f = 1kHz
– – 3 dB
Note 2. Typically, a minimum of 95% of the distribution is above this value.
Note 3. Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 2%
.135 (3.45) Min
.210
(5.33)
Max
Seating Plane
.500
(12.7)
Min
.021 (.445) Dia Max
.100 (2.54)
.105 (2.67) Max
.205 (5.2) Max
ECB
.050 (1.27)
.165
(4.2)
Max
.105 (2.67) Max