DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

TS922 View Datasheet(PDF) - STMicroelectronics

Part Name
Description
Manufacturer
TS922 Datasheet PDF : 24 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Absolute maximum ratings and operating conditions
TS922, TS922A
2
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol
Parameter
Value
Unit
VCC
Vid
Vin
Tstg
Rthja
Rthjc
Supply voltage(1)
Differential input voltage(2)
Input voltage(3)
Storage temperature
Thermal resistance junction to ambient(4)
Flip-chip
SO8
TSSOP8
Thermal resistance junction to case(4)
SO8
TSSOP8
14
±1
V
VCC- -0.3 to VCC++0.3
-65 to +150
°C
90
125
120
°C/W
40
37
Tj
ESD
Maximum junction temperature
HBM: human body model(5)
MM: machine model(6)
CDM: charged device model(7)
Output short-circuit duration
150
°C
2000
120
V
1500
See note(8)
Latch-up immunity
200
mA
Soldering temperature (10 s), leaded version
Soldering temperature (10 s), unleaded version
250
260
°C
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal. If
Vreidsi>st±o1r
V, the maximum input
must be added to limit
current must not exceed
the input current.
±1
mA.
In
this
case
(Vid
>
±1
V),
an
input
series
3. Do not exceed 14 V.
4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-
circuits on all amplifiers. These values are typical.
5. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
pin combinations with other pins floating.
7. Charged device model: all pins and plus package are charged together to the specified voltage and then
discharged directly to ground.
8.
There is no short-circuit protection inside
excessive heating. The maximum output
cthuerrednetviiscea:psphroorxti-mciarcteuliyts8f0rommAt,hiendoeuptpeuntdteonVt CoCf tchaenmcaagunsietude
of
VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers.
4/24
DocID5150 Rev 11
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]